Mac Os Still Waiting For Root Device Usb

admin

Sep 29, 2020 'Waiting for Root Device' or Prohibited Sign error This is where our FakeSMC/VirtualSMC come into the scene and do their magic, DSMOS itself is a kext that verifies if your system has an SMC and will request a key. If this key is missing, then DSMOS will not decrypt the rest of the binaries and you'll get stuck here. In Verbose mode it crashes half way, a 'no entry' icon pops up and the last text says 'Still waiting for root device'. I followed all the instructions one by one. I tried it in multiple USB drives and different ports; tried creating the installation drive with Unibeast and Terminal. Aug 05, 2012 This entry was posted in Hackintosh, Mac OS X, Tips & Tricks and tagged IOAHCIBlockStorage.kext, Mountain Lion, OS X 10.8, Still waiting for root device by Vahan. Bookmark the permalink. 23 thoughts on “ Fix for “Still waiting for root device” on OS X 10.8 Mountain Lion ”.

Reported by:Owned by:
Component: installer Version: VirtualBox 4.0.4
Keywords: Cc:
Guest type: OSX Server Host type: Windows

Description

Topic says it.can't install due to 'still waiting for root device'. I've taken a Mac OS X 10.6 Server DVD, created a cdr image of it in OS X (due to the fact that the DVD is dual layer, and the Windows machine here has only a single layer DVD), and attached it to IDE Primary.

Attachments

VBox.log (75.6 KB) - added by wproxym8 years ago.
virtualbox log

Change History

comment:2 Changed 9 years ago by grahamperrin

Changed 8 years ago by wproxym

  • attachmentVBox.log added
Mac os still waiting for root device usb debugging

comment:4follow-up:↓ 5 Changed 8 years ago by wproxym

Last edited 8 years ago by wproxym (previous) (diff)

comment:5 in reply to: ↑ 4 Changed 8 years ago by Hachiman

comment:6 Changed 7 years ago by frank

  • Status changed from new to closed
  • Resolution set to fixed
Jump to: navigation, search

Mac Os Still Waiting For Root Device Usb Adapter

A major problem preventing lots of users from using OSX86 on their pc.

Mac Os Still Waiting For Root Device Usb 3.0

  • 1nForce SATA

[edit] nForce SATA

Mac os still waiting for root device usb 3.0

[edit] No detection of SATA at boot in nForce3 once MacOS 10.4.6 is installed

After installing OS X 10.4.6 native with VMware with any of the method listed in the installation guides, the first boot was OK, configure the OSX with keyboard, personal info, etc...But when you turn it off and on again, it freezes in the holy 'Still waiting for root device'.My solution was, start OSX with the -v -x flags, for my surprise it recognize the SATA disk and start in safe mode. Then i went to Terminal, entered as root and typed the following...(extracted from 'AppleVIAATA.kext' Method)

Then rebooted and everything worked fine...

Seems like reloading the extensions cause OSX load the SATA driver correctly at boot. If someone know why, you are welcome :) .reply for why does this happen-----when i was installing osx with windows installed,i by mistakely deleted the windows partition which became in red coloured text.....i thin something important file was deleted .....

[edit] You can use chroot to run this from the installer disc

Note that you can operate on an already-installed copy of Mac OS X from the install disc by accessing the Terminal utility. kextcache will crash, however, as it doesnt have write access to /tmp (as its mounted to a location on the read-only optical disc). You can work around this by running another instance of bash inside of chroot... type chroot /Volumes/MyOSXInstall bash and the new bash shell will have a root path set to the root path of your installed volume. kextcache will work correctly. . .

[edit] Other Problems

Likely problems:
SATA
Hard drive not set as Primary Master
Incompatible hardware
CMOS Checksum Bad Error

Solutions:
'AppleVIAATA.kext' Method
Make Hard drive Primary Master hd 1
If you are using a SATA disk, make sure it is set for IDE legacy mode in the PC BIOS and not 'enhanced'
Get a IDE Hard Disk(you can attach the IDE hard disk, but still install the OS on the SATA drive. It just helps to get past the 'still waiting for root device error'.)
If accompanied by a CMOS checksum bad error at boot, reload BIOS optimised defaults, change to AHCI and HPET to 64-bit mode.(Post them if it is not listed)
Unplug all drives from the motherboard (CD/DVD) except the install drive and install via a USB DVD drive. It seems that OSX86 tries to install to a DVD drive on occasion. This worked for me on 7 different machines with this issue. You may reconnect after the install.

BootLoader
Sometimes the version of the BootLoader is too old or too buggy that it can't detect the Hard-diskso Try to update the boot loader version manually voodooprojects.org
or using any Automatic Tool Like 'Chameleon Wizard' or 'Champlist'

Disscussions:
OSX86 Forum
OSX86 Wiki
7 single lines

p.s. if you have the problem don't cry, there are a lot of things that cause this problem. Many of us out there are also experiencing this problem. . . .

Mac Os Still Waiting For Root Device Usb Drive

Retrieved from 'http://wiki.osx86project.org/wiki/index.php?title=Still_waiting_for_root_device&oldid=60730'

Mac Os Still Waiting For Root Device Usb 3.0


This page was last modified on 7 December 2011, at 13:32.
This page has been accessed 330,658 times.